Antique Engines and Old Iron
[Home] - [HELP] - [Forums] - [Groups] - [Classified Ads] - [Subscribe] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Antique Engine Community > Small Air Cooled Gasoline Engines > Wisconsin Engines
Forgot Password? Join Us!


Wisconsin Engines Single cylinder up to V4 engines.

Wisconsin Engines

Wisconsin AF engine bearings

this thread has 0 replies and has been viewed 1486 times

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-26-2012, 11:32:44 AM
Andries Andries is offline
Join Date: May 2010
Location: The Netherlands
Posts: 7
Thanks: 0
Thanked 1 Time in 1 Post
Default Wisconsin AF engine bearings


I’m looking for replacement/restore bearings for my 1939 engine Wisconsin AF type.
The engine was brought to The Netherlands during the second world war with the US army.

Two bearings make Timken 344-332, used for the crankshaft and
One thrust bearing make Nice thrust ball bearing 5774, used for the governor shaft.

The information about the Timken 344-332 bearing:

Overall width: 0.8268 inch
Overall outside diameter: 3.1496 inch
Bore diameter: 1.5748 inch

The information about the Nice thrust ball bearing 5774:

The dimensions of the thrust bearing measured:

overall height: 0.4375 inch
overall outside diameter: 1.4375 inch
Bore diameter: minimum: 0.750 inch and 0.765 inch
9 balls with diameter of 0.1875 inch

Hope someone can give me information for an address to get a price for the bearings
or maybe a type number from other manufactures like SKF or FAG etc because the Nice thrust Ball bearing is a trouble one.

Thank you,
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Large Brass Engine Bearings steve davis Unidentified Engines 2 04-15-2010 10:45:59 PM
How to pull roller bearings from V4 Wisconsin crank? Michaeljp86 Wisconsin Engines 10 06-21-2009 11:55:26 PM
Bearings for a LA or LB engine hfskipper Hit & Miss Gas Engine Discussion 11 04-19-2008 10:54:54 PM
IHC LB Engine Bearings Stevie (CA) Antique Engine Archives 2 03-17-2002 12:36:07 PM
IHC engine bearings HELP!! Chuck Maurer Antique Engine Archives 1 07-10-2001 04:53:32 PM

Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 04:09:44 AM.

Smokstak and Enginads site search!

All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2019 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277