Antique Engines and Old Iron
[Home] - [HELP] - [Forums] - [Library] - [Photo Gallery] - [Groups] - [Classified Ads] - [Subscribe] - [Links] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Shop Equipment Tools and Techniques > Machine Shop and Tool Talk
Forgot Password? Join Us!

Notices

Machine Shop and Tool Talk Shop Equipment, fabrication, repairs, how to fix it, which tool to use for the job. Machinist shop talk, straight to the point.

Machine Shop and Tool Talk

Saved by the Bell


this thread has 11 replies and has been viewed 1077 times

Reply
 
Thread Tools Display Modes
  #1  
Old 05-16-2019, 10:38:11 PM
J.B. Castagnos J.B. Castagnos is offline
Registered-III
 
Join Date: Nov 2004
Location: South Louisiana USA
Posts: 2,685
Thanks: 915
Thanked 3,526 Times in 1,105 Posts
Default Saved by the Bell

Actually, it's saved the bell. The city is building a new fire station, they have the bell from one of the original fire stations, the bell is marked 1888, the yoke is patent 1866. The pins on the yoke were rusted about half away. They look like they were cast into the yoke. I welded them up and put them in my big lathe, don't use it often but it's handy when needed. The yoke cleared by about a 1/16", it's a 21" Summit.
Attached Thumbnails
Click image for larger version

Name:	bell.JPG
Views:	358
Size:	119.5 KB
ID:	334954  
Reply With Quote
Sponsored Links
  #2  
Old 05-16-2019, 11:41:49 PM
Bob Shannon Bob Shannon is offline
Registered-II
 
Join Date: Feb 2005
Location: Illinois USA
Posts: 170
Thanks: 26
Thanked 50 Times in 40 Posts
Default Re: saved by the bell

Nice job!
Reply With Quote
The Following User Says Thank You to Bob Shannon For This Post:
  #3  
Old 05-16-2019, 11:52:08 PM
uglyblue66 uglyblue66 is offline
Subscriber
 
Join Date: Dec 2007
Location: Concord, North carolina
Posts: 5,126
Thanks: 2,245
Thanked 4,074 Times in 1,897 Posts
Default Re: saved by the bell

I have been around a purty large lathe and have a small one myself. That looks like it woulda been Scary having that much iron, with unknown defects in casting, spinning round and round. I would assume you had it turning rather slow?
Reply With Quote
The Following User Says Thank You to uglyblue66 For This Post:
  #4  
Old 05-17-2019, 12:50:08 AM
Dwayne Fuller's Avatar
Dwayne Fuller Dwayne Fuller is offline
Subscriber
 
Join Date: Apr 2008
Location: Longview, Texas, USA
Posts: 2,234
Thanks: 3,450
Thanked 3,644 Times in 1,080 Posts
Default Re: saved by the bell

Wow, good save JB. Good use for the big lathe.
Reply With Quote
The Following User Says Thank You to Dwayne Fuller For This Post:
  #5  
Old 05-17-2019, 05:15:03 AM
J.B. Castagnos J.B. Castagnos is offline
Registered-III
 
Join Date: Nov 2004
Location: South Louisiana USA
Posts: 2,685
Thanks: 915
Thanked 3,526 Times in 1,105 Posts
Default Re: saved by the bell

Quote:
Originally Posted by uglyblue66 View Post
I have been around a purty large lathe and have a small 1 myself. That looks like it woulda been Scary having that much iron, with unknown defects in casting, spinning round and round. I would assume you had it turning rather slow?
Yep, it wasn't spinning very fast, I have one side finished, going to flip it and do the other side.
Reply With Quote
  #6  
Old 05-17-2019, 08:58:38 AM
Steve Kunz's Avatar
Steve Kunz Steve Kunz is offline
Subscriber
 
Join Date: Feb 2008
Location: Valley Park, Missouri, USA
Posts: 1,284
Thanks: 6,310
Thanked 1,434 Times in 643 Posts
Default Re: Saved by the Bell

Nice job! We had a Big old lathe in the shop at the plant where I used to work, I think it was about a 24" swing. It did not get used much either, maybe once a year on a large project. When the plant closed they could not give it away. It would have a major job to get it out. I think it was put in and the building built around it!
__________________
Steve Kunz
Reply With Quote
The Following 2 Users Say Thank You to Steve Kunz For This Post:
  #7  
Old 05-17-2019, 06:34:13 PM
J.B. Castagnos J.B. Castagnos is offline
Registered-III
 
Join Date: Nov 2004
Location: South Louisiana USA
Posts: 2,685
Thanks: 915
Thanked 3,526 Times in 1,105 Posts
Default Re: Saved by the Bell

In the first photo, you can see how the pivots looked when the bell arrived, the second shows them repaired. The slow turning made it difficult to get a nice finish, a file and emery cloth made it look respectable. I polished up one spot on the bell to show the fireman how it should look. I have to make the support frame and the arm for the pull rope. I'll probably make patterns and have Cattail cast them, can add the department name, date, and put my name on the back.
Attached Thumbnails
Click image for larger version

Name:	bell2.jpg
Views:	171
Size:	104.9 KB
ID:	335002   Click image for larger version

Name:	bell3.JPG
Views:	183
Size:	95.9 KB
ID:	335003  
Reply With Quote
The Following 4 Users Say Thank You to J.B. Castagnos For This Post:
  #8  
Old 05-20-2019, 09:49:28 AM
miro miro is offline
Registered-I
 
Join Date: Feb 2013
Location: Toronto, Ontario, Canada
Posts: 61
Thanks: 0
Thanked 38 Times in 18 Posts
Default Re: Saved by the Bell

Nice work JB - I like the "old school" approach - file and emery cloth - works more often than most folks know.

miro
Reply With Quote
The Following 3 Users Say Thank You to miro For This Post:
  #9  
Old 05-22-2019, 06:29:59 PM
J.B. Castagnos J.B. Castagnos is offline
Registered-III
 
Join Date: Nov 2004
Location: South Louisiana USA
Posts: 2,685
Thanks: 915
Thanked 3,526 Times in 1,105 Posts
Default Re: Saved by the Bell

One of the fireman came in today and started cleaning up the bell, it looks good.
Attached Thumbnails
Click image for larger version

Name:	bell polished.JPG
Views:	116
Size:	128.6 KB
ID:	335381  
Reply With Quote
The Following 4 Users Say Thank You to J.B. Castagnos For This Post:
  #10  
Old 05-22-2019, 08:04:26 PM
Todd Hodges's Avatar
Todd Hodges Todd Hodges is offline
Subscriber
 
Join Date: Jan 2008
Location: Decatur, Texas
Posts: 689
Thanks: 135
Thanked 620 Times in 250 Posts
Default Re: Saved by the Bell

Looks like heís breaking a sweat turn the fan on thatís in front of him
Reply With Quote
  #11  
Old 05-23-2019, 07:24:15 PM
DavidRaines DavidRaines is offline
Subscriber
 
Join Date: Sep 2005
Location: Kearney, Missouri, USA
Posts: 829
Thanks: 448
Thanked 900 Times in 320 Posts
Default Re: Saved by the Bell

Nice job JB. Iím sure they appreciate your efforts.
Reply With Quote
The Following User Says Thank You to DavidRaines For This Post:
  #12  
Old 05-26-2019, 08:08:37 PM
dkamp dkamp is offline
eMail NOT Working
 
Join Date: Oct 2007
Location: LeClaire, Iowa, USA
Posts: 1,618
Thanks: 34
Thanked 842 Times in 556 Posts
Default Re: Saved by the Bell

Fine Work, JB!!! Save history...
Reply With Quote
The Following User Says Thank You to dkamp For This Post:
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
C.S.Bell No 4 Mill bigGURN Farm + Industrial Antiques and Collectibles 7 06-15-2012 08:15:27 PM
Large Bell Dan Burkart Steam Stationary Engines, Traction Engines 0 05-23-2012 08:56:16 PM
C.S. Bell B-50 Mill Plntdctr Farm + Industrial Antiques and Collectibles 0 10-14-2009 04:43:28 PM
Brass Bell Kevin Kusel Farm + Industrial Antiques and Collectibles 8 08-28-2009 01:24:07 AM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 09:19:59 AM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2019 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277