Antique Engines and Old Iron
[Home] - [HELP] - [Forums] - [Library] - [Photo Gallery] - [Groups] - [Classified Ads] - [Subscribe] - [Links] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Shop Equipment Tools and Techniques > Machine Shop and Tool Talk
Forgot Password? Join Us!

Notices

Machine Shop and Tool Talk Shop Equipment, fabrication, repairs, how to fix it, which tool to use for the job. Machinist shop talk, straight to the point.

Machine Shop and Tool Talk

chase threads but what pitch?


this thread has 8 replies and has been viewed 805 times

Reply
 
Thread Tools Display Modes
  #1  
Old 04-23-2019, 06:24:39 PM
DustyBar DustyBar is offline
Subscriber
 
Join Date: Jan 2011
Location: near Kansas City, Missouri
Posts: 1,951
Thanks: 1,504
Thanked 1,592 Times in 691 Posts
Default chase threads but what pitch?

What is this tool? It appears it might be used to chase threads but each hole has the same pitch. The pitch is too fine to match the bolts I tried in it but seems to be close to pipe thread. The diameters listed on the tool don't match pipe size however. There is no manufacturer name on the tool.
Attached Thumbnails
Click image for larger version

Name:	IMG_20190423_154736 (Medium).jpg
Views:	283
Size:	93.5 KB
ID:	333311  
Reply With Quote
Sponsored Links
  #2  
Old 04-23-2019, 06:39:03 PM
circuitman circuitman is offline
Registered-I
 
Join Date: Mar 2013
Location: Saluda, South Carolina
Posts: 376
Thanks: 278
Thanked 89 Times in 70 Posts
Default Re: chase threads but what pitch?

that is the part of a flaring tool for copper pipe.this is what holds it while you flare the end.
Reply With Quote
  #3  
Old 04-23-2019, 06:42:34 PM
Jake Jacobs Jake Jacobs is online now
Registered-II
 
Join Date: Jul 2006
Location: Spring valley, Illinois
Posts: 410
Thanks: 1
Thanked 367 Times in 181 Posts
Default Re: chase threads but what pitch?

Used on axles and spindles . I have one I use on my Model T Ford.
Reply With Quote
  #4  
Old 04-23-2019, 07:21:01 PM
DustyBar DustyBar is offline
Subscriber
 
Join Date: Jan 2011
Location: near Kansas City, Missouri
Posts: 1,951
Thanks: 1,504
Thanked 1,592 Times in 691 Posts
Default Re: chase threads but what pitch?

Its not a flaring tool. It doesn't have the 45 degree recess on one side to form the flare. It really appears that every size has the same pitch, about 20 tpi.
Reply With Quote
  #5  
Old 04-23-2019, 08:30:13 PM
Bill Hazzard Bill Hazzard is offline
Registered-III
 
Join Date: Nov 2004
Location: Pennsylvania USA
Posts: 2,156
Thanks: 3,871
Thanked 4,707 Times in 1,205 Posts
Default Re: chase threads but what pitch?

There is a 16 TPI thread standard that goes from 7/16" all the way to 6" and all 16 TPI.
Reply With Quote
The Following User Says Thank You to Bill Hazzard For This Post:
  #6  
Old 04-23-2019, 09:31:20 PM
eddie bedwell eddie bedwell is offline
Registered-II
 
Join Date: Jan 2007
Location: melbourne victoria australia
Posts: 332
Thanks: 6,489
Thanked 276 Times in 157 Posts
Default Re: chase threads but what pitch?

Hi Team,
Googled this and found, as Bill said above, it is a Unified Standardized Extra Fine Thread of 16 TPI used all through the size range.
Link explains this.

https://www.gewinde-normen.de/en/16-un-thread.html

Cheers,
Eddie B.
Reply With Quote
The Following 3 Users Say Thank You to eddie bedwell For This Post:
  #7  
Old 04-24-2019, 04:06:00 PM
The Diesel Doctor The Diesel Doctor is offline
Subscriber
 
Join Date: May 2016
Location: Lahaina, Maui, Hawaii
Posts: 485
Thanks: 263
Thanked 795 Times in 284 Posts
Default Re: chase threads but what pitch?

Click image for larger version

Name:	IMG_2536.jpg
Views:	70
Size:	52.3 KB
ID:	333364 My favorite thread chasers. They have saved my butt more than once. Metric 0.75---3.00 STD 11---32 TPI. AL
Reply With Quote
The Following User Says Thank You to The Diesel Doctor For This Post:
  #8  
Old 04-24-2019, 04:46:35 PM
DustyBar DustyBar is offline
Subscriber
 
Join Date: Jan 2011
Location: near Kansas City, Missouri
Posts: 1,951
Thanks: 1,504
Thanked 1,592 Times in 691 Posts
Default Re: chase threads but what pitch?

I took the time to check this tool with my thread pitch gauges. Looks like all are standard UNF for the sizes on the tool. This is no longer a mistery and it will be going to the Lathrop, MO, swap meet in a week and a half.
Reply With Quote
  #9  
Old 07-28-2019, 11:46:47 PM
Beanscoot Beanscoot is offline
Registered-II
 
Join Date: Oct 2007
Location: Victoria, BC Canada
Posts: 369
Thanks: 23
Thanked 113 Times in 74 Posts
Default Re: chase threads but what pitch?

Blue Point also made one, part no. AR-6-A.

I picked one up at the flea market recently and photographed it, but I find it difficult to upload pictures to the forum so unfortunately am not attaching a picture.
Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Onan YD winding pitch? kb1 Onan Generators 2 09-19-2012 12:53:32 PM
Sears David Bradley pitch conversion ShawnMcCammon Chain Saw Collectors 1 09-02-2012 06:46:15 PM
Ronaldson-Tippett Sales Pitch Patrick M Livingstone Smokstak Down Under 0 05-31-2010 06:16:43 AM
Power King gear pitch? Allen Garden Tractors and Mowers 2 03-22-2010 09:03:32 AM
Source For 1/2" pitch Chain matthewblckwd Chain Saw Collectors 4 04-15-2009 01:01:51 PM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 12:58:34 PM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2019 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277