Antique Engines and Old Iron
[Home] - [HELP] - [Forums] - [Groups] - [Classified Ads] - [Subscribe] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Antique Engine Community > Small Air Cooled Gasoline Engines
Forgot Password? Join Us!

Notices

Small Air Cooled Gasoline Engines Briggs & Stratton, Clinton, Lauson, Maytag, Nelson, Wisconsin and other small air cooled engines. Sub forums for mowers, scooters and powered eqipment.

Small Air Cooled Gasoline Engines

AH47 Ignition Parts Needed


this thread has 12 replies and has been viewed 1205 times

Reply
 
Thread Tools Display Modes
  #1  
Old 12-02-2018, 09:56:32 PM
backyardmechanic93 backyardmechanic93 is offline
Registered
 
Join Date: Oct 2018
Location: Melville, Saskatchewan, Canada
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default AH47 Ignition Parts Needed

Looking for a coil for a power products AH47 gas engine. Possibly points & condenser as well. If anyone knows where I might find parts I would appreciate any help. I can be reached at 306-720-0129 (Saskatchewan). Thanks
Reply With Quote
Sponsored Links
  #2  
Old 12-03-2018, 12:19:43 AM
ulgydog56's Avatar
ulgydog56 ulgydog56 is offline
Registered-II
 
Join Date: Dec 2017
Location: Smithcreek, Michigan
Posts: 601
Thanks: 71
Thanked 266 Times in 199 Posts
Default Re: AH47 ignition parts needed

what the hell, try ebay….
Reply With Quote
  #3  
Old 12-03-2018, 01:16:28 AM
K-Tron K-Tron is offline
Registered-III
 
Join Date: Sep 2010
Location: Huntington, NY
Posts: 1,985
Thanks: 906
Thanked 1,004 Times in 697 Posts
Default Re: AH47 ignition parts needed

There should be a small tag (about the size of a quarter) attached to one of the four bolts which secure the cylinder to the crankcase. There will be a number stamped into it. Post that number. I can give you the part number of the coil, points & condenser if the spec number from that tag is posted. I wish Power Products listed parts based on model number, but that is not the case. If your engine has a long stamped aluminum tag riveted to the blower shroud, the spec number could also be there.

Chris
Reply With Quote
  #4  
Old 12-03-2018, 10:30:02 AM
gdstew gdstew is offline
Registered-III
 
Join Date: Jan 2015
Location: New Philadelphia, Ohio, USA
Posts: 1,018
Thanks: 283
Thanked 567 Times in 372 Posts
Default Re: AH47 ignition parts needed

Also note if Phelon or Wico ignition
Reply With Quote
  #5  
Old 12-04-2018, 01:53:09 AM
backyardmechanic93 backyardmechanic93 is offline
Registered
 
Join Date: Oct 2018
Location: Melville, Saskatchewan, Canada
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default Re: AH47 ignition parts needed

Thanks, I will get that number by the weekend.
Reply With Quote
  #6  
Old 12-18-2018, 08:04:16 PM
backyardmechanic93 backyardmechanic93 is offline
Registered
 
Join Date: Oct 2018
Location: Melville, Saskatchewan, Canada
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default Re: AH47 ignition parts needed

The tag reads: T-1042 I
2442357

---------- Post added at 08:04:16 PM ---------- Previous post was at 08:03:09 PM ----------

It's a Phelon
Reply With Quote
  #7  
Old 12-22-2018, 09:06:17 PM
K-Tron K-Tron is offline
Registered-III
 
Join Date: Sep 2010
Location: Huntington, NY
Posts: 1,985
Thanks: 906
Thanked 1,004 Times in 697 Posts
Default Re: AH47 ignition parts needed

T-1042 is definitely AH-47, Power Products unfortunately lists the "magneto" as one assembly which includes the ignition housing, coil, coil laminations, points and condenser. My book lists seven different Phelon ignitions for this engine. 610453, 610366, 610555, 610552, 610454, 610545, 610597. I do not know how to identify which your particular engine uses. Can you post a picture of what you have.

Chris
Reply With Quote
  #8  
Old 12-23-2018, 02:40:49 PM
gdstew gdstew is offline
Registered-III
 
Join Date: Jan 2015
Location: New Philadelphia, Ohio, USA
Posts: 1,018
Thanks: 283
Thanked 567 Times in 372 Posts
Default Re: AH47 ignition parts needed

For a T-1042I engine, I came up with ignition assy 610493. Unfortunately, I misplaced the ignition/carb section book that shows the breakdown for that assy. I'll keep looking.

If your points and condenser are Phelon, there should be a "FG" number stamped in them. If you can find a "F" number on the plate that everything bolts to, I can look up that info in my Phelon book.

Some of our manuals were close to 60 years old, selling the building and moving everything out has made quite a mess of things.
Reply With Quote
  #9  
Old 04-06-2019, 04:17:06 AM
backyardmechanic93 backyardmechanic93 is offline
Registered
 
Join Date: Oct 2018
Location: Melville, Saskatchewan, Canada
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default Re: AH47 ignition parts needed








Maybe these pictures will help. If you recognize the parts and have them (coil,points,condenser), please e-mail me a price, shipped to Calgary, AB. T2M 1R6. Thanks

---------- Post added at 04:07:50 AM ---------- Previous post was at 04:04:59 AM ----------

https://imgur.com/GTspE4p
https://imgur.com/Kg4Dpmo
https://imgur.com/lzCXQUF
https://imgur.com/oB7NL2J






---------- Post added at 04:09:16 AM ---------- Previous post was at 04:07:50 AM ----------

Number stamped on it is F-2120

---------- Post added at 04:17:06 AM ---------- Previous post was at 04:09:16 AM ----------

I know it's been a while ( had a very busy winter) but hopefully the pictures worked. Can't remember who called me about the parts, my phone lost everything.
If anyone has the parts, I would appreciate an e-mail containing your phone number to dansclassicsandcustoms@hotmail.com
Reply With Quote
  #10  
Old 04-06-2019, 08:32:58 AM
Junkologist's Avatar
Junkologist Junkologist is offline
Subscriber
 
Join Date: Nov 2004
Location: Avon, Ohio, USA
Posts: 4,493
Thanks: 3,118
Thanked 3,856 Times in 1,731 Posts
Default Re: AH47 ignition parts needed

Are you sure the coil is bad? Did you clean and dress the points? If not, get a diamond file and dress the points down if they have pits or excessive wear. I have gotten hundreds of small engines running over the last 40 years and can count on one hand the sets of points I have actually replaced and would probably still have three fingers left. Once in a while the tungsten face will come off and that’s when I replace them.
__________________
Mike

Check out my engine videos at https://m.youtube.com/user/Cletrac
SmokStak member #146
Reply With Quote
  #11  
Old 04-06-2019, 12:57:14 PM
gdstew gdstew is offline
Registered-III
 
Join Date: Jan 2015
Location: New Philadelphia, Ohio, USA
Posts: 1,018
Thanks: 283
Thanked 567 Times in 372 Posts
Default Re: AH47 ignition parts needed

per my Phelon book----

coil is FG2180 or FG2180B Tec/Power Products 610371

cond FG2176 610370

Points FG2197 or FG2197B 610378
Reply With Quote
  #12  
Old 04-08-2019, 12:52:09 AM
backyardmechanic93 backyardmechanic93 is offline
Registered
 
Join Date: Oct 2018
Location: Melville, Saskatchewan, Canada
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default Re: AH47 ignition parts needed

Yep, 100% sure the coil is bad. Got a weak spark & zapped myself a couple times, it's just not putting out enough to jump the plug gap. Threw a test light on the plug wire after cleaning points and connections and it blinks really dim. Got the new coil ordered today. I'll post an update after I get it installed. I would be completely SOL if it weren't for this forum, the local small engine shops are useless but you guys are awesome! Thank you!
Reply With Quote
  #13  
Old 05-30-2019, 07:25:51 PM
jedimast5 jedimast5 is offline
Registered
 
Join Date: May 2010
Location: Montebello, California
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default Re: AH47 ignition parts needed

any luck in finding the parts. i just had my ah58 by Bobby Muha in Miss. he is a power products expert.
Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Cushman Model 21 Type X (mag fired) Timing and Ignition Parts needed. KubotaDiesel Hit & Miss Gas Engine Discussion 2 10-13-2016 06:02:59 PM
Tj ignition parts AugerCreek Wisconsin Engines 1 10-25-2014 06:12:44 PM
THD parts needed for electronic ignition oldmansimek Wisconsin Engines 5 06-02-2014 08:08:42 AM
ONAN OCCKB-3CR Ignition parts needed mmland5 Onan Generators 1 08-26-2010 10:59:23 PM
Power Products AH47 info needed pioneer fan Chain Saw Collectors 4 08-07-2009 11:53:19 PM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 06:38:43 PM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2019 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277