Antique Engines and Old Iron
[Home] - [HELP] - [Forums] - [Groups] - [Classified Ads] - [Subscribe] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Shop Equipment Tools and Techniques > Machine Shop and Tool Talk
Forgot Password? Join Us!

Notices

Machine Shop and Tool Talk Shop Equipment, fabrication, repairs, how to fix it, which tool to use for the job. Machinist shop talk, straight to the point.

Machine Shop and Tool Talk

Cleaning aluminium


this thread has 4 replies and has been viewed 3793 times

Reply
 
Thread Tools Display Modes
  #1  
Old 06-23-2004, 12:30:19 PM
Matt Fretwell
Guest
 
Posts: n/a
Default Cleaning aluminium

Hello all,

Does anyone have any preferred methods for cleaning oxide and grease/oil buildup from aluminium, other than sand blasting?

Thanks,

Matt
Reply With Quote
Sponsored Links
  #2  
Old 06-26-2004, 06:09:29 PM
ray cardoza
Guest
 
Posts: n/a
Default Re: Cleaning aluminium

use a engine cleaning foam like gunk foamy engine brite to remove the oil and grease build up. let it soak for the recommended time and repeat as needed as for the rest try using light sand paper or a wire brush hand brush not the kind used in a drill or else you could scratch the aluminum since it is a soft metal hope this helps
Reply With Quote
  #3  
Old 12-06-2004, 01:45:38 AM
Robt.'s Avatar
Robt. Robt. is offline
Subscriber
 
Join Date: Nov 2004
Location: Victoria, British Columbia, Canada
Posts: 542
Thanks: 79
Thanked 173 Times in 78 Posts
Default Re: Cleaning aluminium

Soda blasting, plastic bead blasting, walnut shell blasting. Glass beads or sand will stipple the surface of course. OK if you're going to paint, not if you're going to polish. Soda is very good at removing dirt, paint and oxides. You can get a blasting attachment for many pressure washers that will siphon up sand, soda or whatever. Some 20lb bags of Arm & Hammer and that's it. The water keeps the dust down nicely, whatever media you are blasting with.
Reply With Quote
  #4  
Old 12-06-2004, 02:20:00 AM
Franz
Guest
 
Posts: n/a
Default Re: Cleaning aluminium

If you don't favor labor, electrolosys works very nicely.
Reply With Quote
  #5  
Old 12-06-2004, 08:22:20 AM
Frank Gassett Frank Gassett is offline
Email Not Working
 
Join Date: Nov 2004
Location: Oglethorpe, Ga.
Posts: 38
Thanks: 0
Thanked 2 Times in 2 Posts
Default Re: Cleaning aluminium

Use a degreaser to remove oil and grease. A chemical etching solution will remove surface corrosion and leave a corrosion resistant film there on. Etching solutions may be found at auto paint stores or body repair facilities. Another source would be the local airport---aluminum aircraft.
Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Briggs WMB Aluminium Shroud Mike Unwin Small Air Cooled Gasoline Engines 1 07-18-2014 08:03:44 PM
A lot of smoke and popping mig welding aluminium Kpack Welding Shop 10 11-12-2012 11:45:15 PM
White spots on aluminium Kpack Blacksmithing and Metallurgy 6 06-27-2012 10:13:56 PM
4HP Aluminium Briggs And Stratton Drake Small Air Cooled Gasoline Engines 2 09-25-2011 10:50:12 PM
Bending cast aluminium David Parfitt Blacksmithing and Metallurgy 6 11-04-2008 10:48:27 PM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 10:00:06 PM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2019 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277