Antique Engines and Old Iron
[Home] - [HELP] - [Forums] - [Groups] - [Classified Ads] - [Subscribe] - [Books] - [Sponsors] -

Go Back   SmokStak > SmokStak® Antique Engine Community > Hit & Miss Gas Engine Discussion > Antique Engine Archives
Forgot Password? Join Us!

Notices

Antique Engine Archives All archived posts from 1999 to 2004 when SmokStak was on EnginAds. This is a read-only board.

Antique Engine Archives

Pattern Making


this thread has 5 replies and has been viewed 1715 times

 
 
Thread Tools Display Modes
  #1  
Old 05-01-2002, 12:44:26 PM
Jonathan
Guest
 
Posts: n/a
Default Pattern Making

I am going to be attempting to make a pattern for a flywheel to get cast, and I was wondering if anyone could tell me how to go about making the spokes that oval/oblong shape. I've never done anything much with patterns before so this is going to be a bit of an adventure.

Any help you guys can offer would be great.

(The flywheel is going have a 14-15" diameter if that helps.

Thanks

Jonathan
Sponsored Links
  #2  
Old 05-01-2002, 10:44:00 PM
Roland Finkenbinder
Guest
 
Posts: n/a
Default Re: Pattern Making

Jonathan, I made a pattern for a 1 1/2hp Messinger engine, but these are a very easy pattern , because of the almost square edges on the rim and the flat spokes. I started with a piece of 1/4" plywood and built out on both sides with pine. I made a tilted table with a center pivot the size of the core print and rotated it on an overhead router . The spokes were hand routed before the rim was added. What are you making this wheel for? If you need more info contact me. ---Roland
  #3  
Old 05-03-2002, 06:34:20 AM
Paul Gray
Guest
 
Posts: n/a
Default Re: Pattern Making

I made a pattern for an 8" Rider-Ericsson flywheel.You can see the pictures at the link below. I made mine out of plywood and bondo. Came out real nice- took a lot of time though


Flywheel and other patterns
  #4  
Old 05-05-2002, 12:28:08 AM
Christopher Winslow
Guest
 
Posts: n/a
Default Re: Pattern Making

I am interested to see the page - but the link doesn't work for me.
  #5  
Old 05-05-2002, 07:50:36 PM
Dale Russell (KS)
Guest
 
Posts: n/a
Default Re: Pattern Making

Doesn't work for me either, Dale in S.E. Ks.
  #6  
Old 05-05-2002, 08:49:11 PM
Brian Triebner
Guest
 
Posts: n/a
Default Re: Pattern Making

Delete everything in the address after pgray/ That worked for me. Brian
 

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

F o r u m Jump

Similar Threads Chosen at Random
Thread Thread Starter F o r u m Replies Last Post
Pattern Making Rusty Engines Smokstak Down Under 23 12-30-2016 04:06:49 AM
Looking for a Pattern Maker fm00 Blacksmithing and Metallurgy 5 03-06-2012 11:05:56 PM
sand casting-pattern making moparguy Scale Model Engineering 6 02-08-2012 11:25:47 PM
pattern making book. Greg Shipley Hit & Miss Gas Engine Discussion 2 11-18-2011 11:27:12 PM
Our own pattern maker Craig A Antique Steel Wheel Tractors - Old Iron Lugs and Cleats 7 05-15-2010 03:42:33 PM


Use "Ctrl" mouse wheel to change screen size.
All times are GMT -4. The time now is 01:49:09 PM.

Smokstak and Enginads site search!


All use is subject to our TERMS OF SERVICE
SMOKSTAK® is a Registered Trade Mark - A Community of Antique Engine Enthusiasts
Copyright © 2000 - 2019 by Harry Matthews P.O. Box 5612 - Sarasota, FL 34277